Fluke MET/CAL Procedure ============================================================================= INSTRUMENT: Soar 4020: (1 year) CAL VER /5500 DATE: 10-Sep-97 AUTHOR: Fluke Corporation REVISION: $Revision: 1.5 $ ADJUSTMENT THRESHOLD: 70% NUMBER OF TESTS: 31 NUMBER OF LINES: 125 CONFIGURATION: Fluke 5500A ============================================================================= # # Compatibility: # 5500/CAL 4.0 or MET/CAL 4.0 or later. # # Subprocedures: # None # # Required Files: # 4020V.bmp # 4020LC.bmp # 4020HC.bmp # # System Specifications: # TUR calculation is based on specification interval of the accuracy file. # The default 5500A accuracy file contains 90 day specs. # # Fluke makes no warranty, expressed or implied, as to the fitness # or suitability of this procedure in the customer's application. # STEP FSC RANGE NOMINAL TOLERANCE MOD1 MOD2 3 4 CON 1.001 DISP {Procedure not formally tested with UUT.} 1.001 DISP {See procedure README file.} 1.002 ASK- R P F V 1.003 ASK+ K X 1.004 HEAD PRELIMINARY INSTRUCTIONS 1.005 DISP Warm-up time: NONE 1.005 DISP Temperature: 18 - 28 degC 1.005 DISP Humidity: <80% 1.006 DISP [32] WARNING 1.006 DISP HIGH VOLTAGE is used or exposed during the performance 1.006 DISP of this calibration. DEATH ON CONTACT may result if 1.006 DISP personnel fail to observe safety precautions. 1.007 HEAD {DC VOLTAGE} 1.008 PIC 4020V 1.009 DISP Press the POWER button to turn the unit ON. 1.009 DISP 1.009 DISP Set the FUNCTION switch to 400mV DC. 1.010 HEAD DC VOLTAGE: {400mV Range} 1.011 5500 400 0.0mV 0.1U 2W 2.001 5500 400 380.0mV 1.1U 2W 3.001 5500 400 -380.0mV 1.1U 2W 4.001 DISP Set the FUNCTION switch to DC Volts. 4.002 HEAD DC VOLTAGE: {4V Range} 4.003 5500 4 3.800V 0.011U 2W 5.001 5500 4 -3.800V 0.011U 2W 6.001 HEAD DC VOLTAGE: {40V Range} 6.002 5500 40 38.00V 0.11U 2W 7.001 HEAD DC VOLTAGE: {400V Range} 7.002 5500 400 380.0V 1.1U 2W 8.001 HEAD DC VOLTAGE: {1000V Range} 8.002 5500 1000 1000V 3U 2W 9.001 HEAD {AC VOLTAGE} 9.002 DISP Set the FUNCTION switch to AC Volts. 9.003 HEAD AC VOLTAGE: {4V Range} 9.004 5500 4 0.000V -0.002U +0U 2W 10.001 5500 4 3.800V 0.038U 100H SI 2W 11.001 HEAD AC VOLTAGE: {40V Range} 11.002 5500 40 38.00V 0.38U 100H SI 2W 12.001 HEAD AC VOLTAGE: {400V Range} 12.002 5500 400 380.0V 3.8U 100H SI 2W 13.001 HEAD AC VOLTAGE: {750V Range} 13.002 5500 750 750V 7U 100H SI 2W 14.001 HEAD {RESISTANCE} 14.002 DISP Set the FUNCTION switch to Ohms. 14.003 HEAD RESISTANCE: {40 MOhm Range} 14.004 5500 40 38.00MZ 0.76U 2W 15.001 HEAD RESISTANCE: {4 MOhm Range} 15.002 5500 4 3.800MZ 0.026U 2W 16.001 HEAD RESISTANCE: {400 kOhm Range} 16.002 5500 400 380.0kZ 2.6U 2W 17.001 HEAD RESISTANCE: {40 kOhm Range} 17.002 DISP Connect the 5500A to the UUT as follows: 17.002 DISP [32] 5500A AUX HI to UUT V/OHM 17.002 DISP [32] 5500A AUX LO to UUT COM 17.002 DISP [32] 5500A NORMAL HI to UUT V/OHM 17.002 DISP [32] 5500A NORMAL LO to UUT COM 17.002 DISP Connect the SENSE leads DIRECTLY to the UUT. Connect 17.002 DISP the NORMAL leads to the SENSE leads AT the UUT. 17.003 5500 40 38.00kZ 0.26U CW 18.001 HEAD RESISTANCE: {4 kOhm Range} 18.002 5500 4 3.800kZ 0.026U CW 19.001 HEAD RESISTANCE: {400 Ohm Range} 19.002 5500 400 0.0Z 0.2U CW 20.001 5500 400 380.0Z 2.6U CW 21.001 HEAD {CONTINUITY} 21.002 DISP Press the CONTINUITY button to select CONTINUITY TEST. 21.003 5500 10.0Z S CW 21.004 EVAL Is an AUDIBLE TONE present? 22.001 HEAD {DIODE} 22.002 PIC 4020V 22.003 DISP Set the FUNCTION switch to DIODE. 22.004 5500 0.500V 0.1U 2W 23.001 HEAD {DC CURRENT} 23.002 DISP Set the FUNCTION switch to DC A. 23.003 PIC 4020lc 23.004 HEAD DC CURRENT: {40mA Range} 23.005 5500 40 0.00mA 0.02U 2W 24.001 5500 40 38.00mA 0.45U 2W 25.001 HEAD DC CURRENT: {400mA Range} 25.002 5500 400 380.0mA 7.6U 2W 26.001 PIC 4020hc 26.002 HEAD DC CURRENT: {10A Range} 26.003 5500 10 10.00A 0.15U 2W 27.001 HEAD {AC CURRENT} 27.002 DISP Set the FUNCTION switch to AC A. 27.003 HEAD AC CURRENT: {10A Range} 27.004 5500 10 10.00A 0.2U 100H SI 2W 28.001 PIC 4020lc 28.002 HEAD AC CURRENT: {40mA Range} 28.003 5500 40 0.00mA -0.02U +0U 2W 29.001 5500 40 38.00mA 0.76U 100H SI 2W 30.001 HEAD AC CURRENT: {400mA Range} 30.002 5500 400 380.0mA 7.6U 100H SI 2W 31.001 END